Fix Stormworks Flooding Not Working

Vinay

Fix Stormworks Flooding Not Working

Stormworks: Build and Rescue is a sandbox game where you can design, create and pilot your own vehicles. However, sometimes you may encounter problems with your creations, such as flooding. Flooding can occur when your vehicle is damaged, has a leak, or is submerged too deep.

In this article, we will show you some possible solutions to fix stormworks flooding not working.

How to Fix Stormworks Flooding Not Working

Depending on the cause of the problem, there are different solutions that you can try to fix stormworks flooding not working, such as:

Check the Pipes and Pumps

One of the first things that you should do is to check the pipes and the pumps that are connected to the fluid ports. Make sure that they are not broken, inverted, or blocked. You can use the detailed tooltips to see the water flow and the electricity of the pumps. You can also use the logic system to control the pumps and the valves.

Seal the Holes and Leaks

Another thing that you should do is to seal the holes and the leaks that are allowing water to enter or exit your vehicle. You can use the damage graphics to see where the damage is located. You can also use the repair tool to fix the damage. You can also use wedges, blocks, or doors to cover the gaps or the openings.

Lower the Center of Mass

Another thing that you can do is to lower the center of mass of your vehicle. This can make your vehicle more stable and less likely to tip over or sink. You can use the weight blocks to add some weight to the bottom of the hull. You can also use the build mode to see the center of mass and the buoyancy of your vehicle.

Open the Doors and Hatches

Another thing that you can try is to open the doors and the hatches that are separating the compartments. This can allow the air to escape and the water to equalize. This can also reduce the compression and the pressure of the air inside the compartments. However, this can also make your vehicle more vulnerable to sinking if the water level is too high.

Read : ELEX 3 Cancelled, Piranha Bytes Studio Faces Closure